— RESIDENTIAL ELECTRICAL
Residential Electrical Services for Parker County Homes
Panel upgrades, standby generators, EV chargers, lighting, rewiring, new home wiring, and the repairs in between. We show up when we said we would, explain what we found, and put the price in writing before anything starts.
TECL #37044
Licensed Texas electrical contractor
Licensed and Insured
Certificate of insurance on request
9 Years in Business
Residential, commercial, and service work
Free Estimates
Scope and price in writing before work starts
- WHY HOMEOWNERS CALL US -
What You Get When You
Hire a Licensed Company
Almost anyone can hang a light fixture. The difference shows up when the job is
bigger than that, or when something needs attention later and you want the
same company to stand behind it.
Licensed and Insured
Every job is performed under TECL #37044 and covered by our insurance.
Price in Writing First
You get the scope and the price in writing before we start. Estimates are free.
Permits and Inspections
Where the work needs a permit, we pull it and meet the inspector.
Respect for Your Home
Floors covered, debris hauled off, and the house left the way we would want ours left.
— WHAT WE DO —
Residential Electrical Services
From a dead outlet to a full service upgrade. If it runs on electricity in your home, shop, or barn, we work on it.
Panel Upgrades and Service Changes
Replacing an undersized, full, or outdated panel so the house can carry what you actually plug into it.
Whole Home Standby Generators
Standby generators sized to your load and tied in with an automatic transfer switch.
EV Charger Installation
Level 2 home chargers on a dedicated circuit, installed after we confirm your panel can carry the load.
Lighting Installation
Interior, recessed, under-cabinet, built-in shelf, landscape, and security lighting, with LED throughout.
Home Rewiring
Bringing older wiring up to current code, a room at a time or a whole house at once.
Surge Protection
Whole home surge protection at the panel for appliances, electronics, and HVAC equipment.
Outlets, Switches, and Ceiling Fans
New outlets and circuits, GFCI and USB outlets, dimmers, and ceiling fan installation.
Electrical Safety Inspections
A licensed check of the panel, grounding, wiring, and devices for older homes and new purchases.
New Home Construction
Complete wiring from rough-in through trim, working from your plans and the builder schedule.
Remodels and Additions
Reworking existing circuits and adding new ones for kitchens, baths, and additions.
Shops, Barns, and Metal Buildings
Service, panels, lighting, and outlets for shops, barns, barndominiums, and ag buildings.
Spas, Hot Tubs, and Outdoor Kitchens
Dedicated circuits, disconnects, and GFCI protection for outdoor living.
- MOST REQUESTED
Panel Upgrades and Service Changes
An undersized, full, or outdated panel is the most common reason an older home cannot take on anything new. Before you add a shop, a spa, an EV charger, or a generator, the service has to be able to carry it.
Signs Your Panel Needs Attention
- Breakers that trip repeatedly or will not reset
- A full panel with no room for another circuit
- Fuses instead of breakers
- A panel that feels warm or makes noise
- A home inspector or insurance company flagged the panel
- You are adding a shop, spa, EV charger, or generator
What the Job Involves
We calculate the actual load instead of guessing, size the service correctly, coordinate the disconnect and reconnect with your utility, pull the permit where one is required, and are on site for the inspection.
- BACKUP POWER
Whole Home
Standby Generators
A standby generator is wired into your home and starts on its own when the power drops. No extension cords, no hauling fuel in the dark, and no deciding which one thing stays running.
What the Installation Includes
Load calculation and sizing before you buy the unit
Placement that meets code clearances from windows, doors, and vents
Setting the unit on its pad
Automatic transfer switch installation
Electrical connection to your panel
Coordination with your gas provider or plumber for the fuel line
Permit and inspection where required
Startup and testing before we leave
"Josh came over immediately and gave me a very good price to install the automatic transfer switch and the generator. He even called the Utility to schedule a shutdown, so as to do the final house connections."
David F.
Yelp review
- EV CHARGING
EV Charger Installation
A Level 2 charger at home can fill most electric vehicles overnight. The work is simple when the panel has room and more involved when it does not, which is why we look before we quote.
What We Check and Install
- Panel capacity and a load calculation
- A dedicated 240 volt circuit sized to the charger
- A hardwired charger or a 240 volt outlet, depending on your charger
- Load management options when the panel is close to full
- Permit and inspection where required
- LIGHTING
Lighting That Changes the Room
Good lighting is the upgrade people notice every day. We install recessed lighting, under-cabinet and built-in shelf lighting, fixtures and ceiling fans, and outdoor lighting for landscapes, patios, and security.
- Recessed and can lighting
- Under-cabinet and built-in shelf lighting
- Chandeliers, pendants, and fixture swaps
- Landscape, patio, and security lighting
- LED retrofits for older fixtures
- BUILDING OR REMODELING
New Homes, Remodels, and Rewiring
We work from your plans, coordinate with the builder and the other trades, and carry the job from rough-in through trim.
New Home Construction
- Service, panel, and distribution
- Complete rough-in to plan
- Lighting, fans, and device trim
- Coordination with the builder schedule
- Permit and inspection
Remodels and Additions
- Reworking existing circuits
- Added circuits for kitchens, baths, and appliances
- Bringing older wiring up to current code as we go
- Working around a house you are living in
Rewiring Older Homes
If your home has cloth-insulated wiring, aluminum branch circuits, or ungrounded two-prong outlets, we will tell you what has to change, what can stay, and what it will take.
- SHOPS, BARNS, AND METAL BUILDINGS
Wired for the Way Parker County Works
A lot of our residential work is not inside the house. It is the shop, the barn, the barndominium, and the service out to all of them. We run the service, set the panel, and light the space so it works for what you actually do out there.
- New service and meter pedestals for acreage properties
- Subpanels and feeders to shops and barns
- LED high bay and shop lighting
- Welder, compressor, and equipment circuits
- Exterior and security lighting
"Josh wired my metal building and I could not be happier with the end product. He is honest, professional, on time, efficient, and doesn't leave a mess behind to be cleaned up."
Maryann S.
- WHAT TO EXPECT -
From First Call to Final Inspection
01
Tell Us What Is Going On
Call, book online, or send the details. If we can talk you through it on the phone, we will.
02
We Look at It in Person
We come to the house and look at the actual work instead of quoting it blind. Estimates are free.
03
Scope and Price in Writing
You see exactly what we are doing and what it costs. Nothing starts until you approve it.
04
Scheduled, Done, Inspected
We schedule the work, do it, haul off what we took out, and handle the inspection where one is required.
It is your house. We leave it the way we would want ours left.
- HOMEOWNER QUESTIONS -
Questions We Get
From Homeowners
What does a panel upgrade cost?
Panel upgrade costs typically depend on your home's electrical service size (e.g., 100A to 200A), panel location, and utility coordination. We provide upfront, transparent pricing before any work begins.
How long does a panel upgrade take?
Most residential panel replacements are completed within a single day (usually 4 to 8 hours), minimizing disruption to your power and daily routine.
Do I need a permit for electrical work on my house?
Yes, permits are required for panel upgrades, major circuit additions, and whole-home rewiring to ensure full compliance with local building safety codes. We handle all permitting and city inspection coordination.
Can you work while we are living in the house?
Yes. While power will be temporarily shut off during panel replacement, we schedule outages efficiently, protect your living spaces, and clean up thoroughly at the end of each workday.
My house is older. How do I know if the wiring is safe?
Common warning signs include flickering lights, frequently tripping breakers, warm or discolored outlet covers, or ungrounded two-prong outlets. A comprehensive on-site electrical inspection will accurately diagnose your wiring.
What size standby generator do I need?
Generator size depends on whether you wish to back up critical circuits (refrigerator, lights, medical devices) or your entire home including central HVAC. We perform an exact load calculation to recommend the right kW capacity.
Can my panel handle an EV charger?
Level 2 EV chargers typically require a dedicated 40A to 60A 240V circuit. We inspect your existing electrical capacity to determine if your panel can support it directly or if an upgrade/load management device is recommended.
GET STARTED
Work With Us
Residential, commercial, or a repair that can’t wait. Tell us what you need, and we will tell you what it takes to get it done right.
Licensed Texas electrical contractor for residential, commercial, and service and repair work across Parker County and North Texas.
Follow Our Work on Social Media—Recent jobs, projects, and updates.
SERVICES
SERVICE AREAS
COMPANY
CONTACT
General
Service Request
Bids and Estimates
Hours
Monday to Friday - 8am to 5pm
4B Electric Inc. | 2073 FM 920, Weatherford, TX 76086 | 682-327-6623 | TECL #37044
Regulated by the Texas Department of Licensing and Regulation, P.O. Box 12157, Austin, Texas 78711, 800-803-9202. www.tdlr.texas.gov
Copyright 2026. 4BElectric Inc. All rights reserved.
Privacy Policy | Terms of Service | SMS Terms | Chat Assistant | Accessibility